22
2
To
EAR
jack
Recording
R
e
cording
Notes
• To ensure recording from the beginning,
start speaking after you see the recording
indicator light on.
• When remaining recording time is less
than 60 seconds, the recording indicator
light starts fl ashing. When the recording
time is decreasing to 30 or 10 seconds, the
light fl ashes faster.
• [
Folder Full
] will appear when the folder
capacity is full. Delete any unnecessary
fi les before recording any further (
☞
P.34).
• [
Memory Full
] will appear when the
memory is full. Delete any unnecessary
fi les before recording any further (
☞
P.34).
• [
6
] will appear on the display.
• Stop recording and the file that was just
recorded will be played back.
Pause
While the recorder is during
recording mode, press the
REC
s
button.
• [
5
] will appear on the display.
• The recorder will time out after 60 minutes
when left in “Rec Pause”.
Resume Recording:
Press the
REC
s
button again.
• Recording will resume at the point of
interruption.
To quickly check on the recorded contents
While the recorder is during
recording mode, press the
OK
`
button.
Listening while audio is recorded
If you start recording after inserting the
earphone into the
EAR
jack on the recorder,
you can hear the sound being recorded. The
recording monitor volume can be adjusted
by pressing the
+
or
−
button.
Connect the earphone to the
EAR
jack on the recorder.
• After recording has started, you can hear
the sound being recorded through the
earphone.
