85
7
EN
Troubleshooting
Troubleshooting
Symptom
Probable cause
Action
Nothing appears on
the display
The battery is not loaded properly.
Verify that the battery polarities
=
and
-
are correct (
☞
P.14).
Battery power is getting low.
Charge the battery (WS-813, WS-812
only) or replace with a new battery
(
☞
P.14, P.16).
The power is off.
Turn the power on (
☞
P.19).
Won’t start
Battery power is getting low.
Charge the battery (WS-813, WS-812
only) or replace with a new battery
(
☞
P.14, P.16).
The power is off.
Turn the power on (
☞
P.19).
The recorder is in HOLD mode.
Release the recorder from HOLD
(
☞
P.20).
Unable to record
Low remaining memory.
Erase unnecessary files (
☞
P.45).
The maximum number of files has
been reached.
Change to another folder
(
☞
P.26 to P.28).
WS-813 only:
[
Output
] in the [
FM Radio
] settings is
set to [
Speaker
].
Set [
Output
] to [
Earphone
] (
☞
P.67).
No playback sound
heard
The earphones are connected.
Unplug the earphones to use the
built-in speaker.
[
Speaker
] is set to [
Off
].
To output from the built-in speaker,
set [
Speaker
] to [
On
] (
☞
P.65).
The volume level is set to [
00
].
Adjust the volume level (
☞
P.36).
Recording level too
low
The microphone sensitivity is too low. Set [
Rec Level
] to [
High
] or [
Middle
]
(
☞
P.56).
This could potentially be because
the output level for the connected
external devices is too low.
Adjust the output level for the
connected devices.
WS-813 only:
The recording level has not been
adjusted.
Adjust the recording level and then try
recording once more (
☞
P.56).
