1
EN
Make the settings for the functions while referring to “Using the Menu” (p. 3).
Menus for Other Camera Settings
These settings can be adjusted from the shooting mode top menu or playback mode top menu.
Erasing data completely
[MEMORY FORMAT]/[FORMAT]
E
SETUP
MEMORY FORMAT/FORMAT
Before formatting, check that no important
data is left in the internal memory or card.
Non-Olympus cards and cards that have
been formatted by a computer must be
formatted with this camera before use.
Submenu 2
Application
YES
Completely erases the image data
in the internal memory
*1
or card
(including protected images).
NO
Cancels formatting.
*1
Be sure to remove the card before formatting the
internal memory.
Copying images in the internal memory
to the card [BACKUP]
E
SETUP
BACKUP
Submenu 2
Application
YES
Backs up image data in the
internal memory to the card.
NO
Cancels the backup.
It takes some time to back up data. Check
that the battery has sufficient power before
starting the backup.
Changing the display language [
W
]
E
SETUP
W
“Changing the display language” (p. 13)
Submenu 2
Application
Languages
*1
The language for the menus and
error messages displayed on the
monitor is selected.
Adjusting the CCD and adjusting the
image processing function
[PIXEL MAPPING]
E
SETUP
PIXEL MAPPING
This function has already been adjusted
at factory shipping, and no adjustment is
needed right after purchase. Approximately
once a year is recommended.
For best results, wait at least one minute
after taking or viewing pictures before
performing pixel mapping. If the camera is
turned off during pixel mapping, be sure to
perform it again.
To adjust the CCD and to adjust the
image processing function
Press the
o
button when [START]
(submenu 2) is displayed.
The camera checks and adjusts the CCD and the
image processing function at the same time.
Using the
K
button or
q
button to
turn on the camera [
K
/
q
]
E
SETUP
K
/
q
Submenu 2
Application
YES
Pressing
K
button turns on
the camera in shooting mode.
Pressing
q
button turns on the
camera in playback mode.
NO
The camera is not turned on
when
K
button or
q
button is
pressed.
To turn on the camera, press the
n
button.
●
