19
5.2.2.7. Software version
The last thing you can view in the Settings menu, is Software version, visible in the second
line of the display.
NOTE
Do not forget to leave Settings menu by pressing the SET button. Green LED in the button’s
corner turns OFF.
5.2.3. Operating mode
CAUTION
In STBY the amplifier is in bypass-mode and your transceiver is directly connected to
the antenna. Maximum allowed power in bypass mode is 100 Watts! Passing RF power
is not measured or displayed if PA is either in standby mode or turned OFF.
Push the
OPER
button to activate operation mode. At that moment 50V DC will be
connected to the MOSFET.
In the
OPERATE
mode you can select CW or SSB transmitting mode, you can scroll Display
menu and select switching of an external RX preamplifier. You can
not
activate Settings
menu.
NOTE
Setting of CW or SSB mode actually means only a bias adjustment (class C or class AB mode
of PA) and is not strictly tied to the operating mode of the connected transceiver.
