14
Screen shows settings possibilities for
ANTENNA, DISPLAY, EBS, BLOWER and other
INFO
Scroll for choose
(up or down) and press
SET
Press
ANTENNA SETTINGS
. First select
ANTENNA SWITCH
(No switch, Standard).
Use left or right arrows. If you select some
switch, 10 ports for different antennas
displays. Generally all of antennas are
allowed in every band (green squares). To
disable some square, select port (up/down),
touch
SET
for antenna name and then select
band (left/right). Press
SET
.
.
Four types of antennas for four different
bands were disabled.
Black square means disabled combination.
Press
EXIT
to go back to
SETTINGS
menu
BCD code (4 bits) is used for automatic antenna and BPF switching (see Antenna/BPF connector
on the Control panel (rear side of the PA). See section 7.9 for Control and ANT/BPF connectors
pin-out.
Type of supported TCVR and
working
frequency are visible on the
display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
Type of supported TCVR and working
frequency are visible on the display.
AUTO LED is ON.
