Cleaning and storing the camera
Cleaning the camera
Turn off the camera and remove the battery before cleaning the camera.
Do not use strong solvents such as benzene or alcohol, or a chemically treated cloth.
Exterior:
Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water and
wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used
the camera at the beach, use a cloth soaked in clean water and well wrung.
Monitor:
Wipe gently with a soft cloth.
Lens:
Blow dust off the lens with a commercially available blower. For the lens, wipe gently with a lens
cleaning paper.
Storage
When not using the camera for a prolonged period, remove the battery and card. Store the camera
in a cool, dry place that is well ventilated.
Insert the battery periodically and test the camera’s functions.
Remove dust and other foreign matter from the body and rear caps before attaching them.
Attach the body cap to the camera to prevent dust from getting inside when no lens is attached. Be
sure to replace the front and rear lens caps before putting the lens away.
Clean the camera after use.
Do not store with insect repellent.
Avoid storing the camera in places where chemicals are treated, in order to protect the camera from
corrosion.
Mold may form on the lens surface if the lens is left dirty.
Check each part of the camera before use if it has not been used for a long time. Before taking
important pictures, be sure to take a test shot and check that the camera works properly.
443
Cleaning and storing the camera
