Wireless Connection Standby Setting for
When the Camera Is On
You can choose whether the camera will be on standby for wireless connection with a smartphone or
optional remote control when the power is on.
Highlight [Wi-Fi/Bluetooth Settings] in the
e
Setup Menu and press
I
.
Highlight [Bluetooth] and press
I
.
Pair the camera with the smartphone or optional remote control before proceeding.
[Bluetooth] cannot be selected unless pairing has been completed.
Highlight the desired option and press the OK button.
Off
The camera will not be on standby for wireless connection and a wireless signal will
not be emitted even when the power is on. For connection with a smartphone, start
in the Playback Menu of the camera.
On
q
When the camera is on, it will emit a wireless signal and be on standby for wireless
connection.
By operating OM Image Share, you can connect the camera to the smartphone and
shoot remotely or transfer images.
On
r
When the camera is turned on, it will start transmitting wireless signals, and if it
has already been paired with an optional remote control (
connection with the remote control.
Because the options in the [Bluetooth] menu also serve to indicate Bluetooth
®
status,
[Stopped] or [Running] will appear alongside the [Off], [On
q
], and [On
r
] options.
If the GPS track log is enabled in the dedicated OM Image Share app, location data
downloaded from the app will be added to pictures taken while [On
q
] is selected.
176
Wireless Connection Standby Setting for When
the Camera Is On
1.
2.
C
3.
B
