GPS function, electronic compass
In locations with limited overhead clearance (inside buildings, underground, underwater, in forests,
near high buildings) or in locations subject to strong magnetic or electric fields (near new high-
voltage power lines, magnets or electrical goods, 1.5GHz mobile telephones), it may not be possible
to determine measurements or errors may occur.
The altitude displayed on the measurement information screen or picture playback screen etc. is
displayed and recorded based on information from pressure sensors built into the camera body.
Please be aware that the displayed altitude is not based on GPS location data.
Electronic compass errors may be caused by the effects of strong magnetic or electrical fields
(such as televisions, microwaves, large motors, radio towers and high-voltage lines). To restore the
electronic compass function, hold the camera firmly and rotate it in a figure-eight motion while
turning your wrist.
Since the GPS function and electronic compass function are not required to be accurate, there is no
guarantee that the measured values (latitude, longitude, compass direction, altitude, temperature,
etc.) are accurate.
If your model is equipped with GPS and Wi-Fi functions, contact the service center in your country
or region in advance, as the repair service may not be available in some countries or regions due to
local laws and regulations.
200
GPS function, electronic compass
