Turn on the dedicated strobe.
Set the flash mode of the dedicated strobe to RC mode.
If channel and group settings are required, select CH1 for the channel, and A for the group.
Highlight Flash in Live Control and select [
A
RC] (Remote Control) (
Take a test shot to check the operation of the flash and the resulting image.
Be sure to check the charge level of the camera and wireless flash before taking pictures.
When the camera flash is set to [
A
RC], the camera’s built-in flash is used for communication with
the wireless flash. It cannot used for taking pictures.
To take pictures with wireless flash, point the remote sensor of the special external flash toward the
camera, and point the flash in the direction of the subject.
Optional accessories
Using optional accessories allows you enjoy shooting in various ways.
To attach an accessory, remove the lens ring that comes with the camera.
LED Light Guide (LG-1)
Prevents uneven illumination of the macro LED when shooting in
7
(Microscope) mode or during macro shooting.
Do not use flash.
This accessory cannot be used underwater.
Flash Diffuser (FD-1)
Allows you to get close to the subject for flash photography when
shooting in
7
(Microscope) mode or during macro shooting.
Lens Barrier (LB-T01)
Prevents smudges and scratches from appearing on the lens surface
when shooting or carrying the lens.
This accessory cannot be used at the same time as a silicone jacket.
Fisheye Converter
(FCON-T01)
1
Allows you to shoot wider scenes.
Circular Fisheye
Converter (FCON-T02)
1
Take both circular fisheye and diagonal fisheye shots by simply changing
the zoom position.
237
Using Separately Sold Accessories
1.
2.
3.
4.
