1
15
Getting started
EN
Charging the battery
3
Press the
N
OK
button to start
charging the battery.
•
When [
Battery
] (
g
P.68) is set
to [
Ni-MH
], [
Press OK to start
charging
] appears on the display.
Press the
N
OK
button while this
message is blinking.
4
Charging has finished when
the battery indicator changes
to [
].
•
[
Please wait
] appears on the
display regardless of whether the
battery is charging or charging is
complete.
NOTE
•
Do not charge primary batteries
such as alkaline batteries or lithium
batteries. Doing so may cause the
recorder to malfunction due to liquid
leakage, heat generation, etc.
•
Charge the batteries via a USB
connection when the power of the
computer is ON. You cannot charge
the batteries when the power of the
computer is OFF or the computer is
in the standby, sleep, or auto power
OFF mode.
•
Do not use a USB hub when
charging the batteries by connecting
to the computer.
•
You cannot charge the batteries if
[
]
*
1
or [
]
*
2
is displayed.
Charge the batteries in an ambient
temperature of between 5 and 35°C
(41 and 95°F).
*1
[
] Ambient temperature is too
low.
*2
[
] Ambient temperature is too
high
•
If battery life has become noticeably
short on a full charge, replace the
batteries with new ones.
•
Insert the USB connector securely
all the way. Operation will not be
normal if the connection is not made
properly.
•
If necessary, use the separately sold
USB extension cable (KP19).
•
Be sure to use the dedicated cable
(KP19) as a USB extension cable.
We cannot guarantee proper
operation if you use a product
manufactured by another company.
Also, never connect this dedicated
cable to a product manufactured by
another company.