30
• Turn the fan off. Select one blade and place the plastic clip on it, where the
plastic clip locates is halfway between the blade holder and the blade tip on
the edge of the blade.
• CAUTION: The plastic clip should be placed on the windward edge
of the blade to avoid clips flying off.
•
• CAUTION: Stay clear of the blades. If the clip, for any reason, is not
secure, injury could result.
•
Once the exact position is determined, place a weight on the top of
the blade, on its centre line and closest to the clip. Peel the paper
off the back of the weight and press firmly to ensure that it is securely
attached to the blade. Remove the clip.
• CAUTION: Clean the surface of fan blade before placing the
balancing weight so that the balancing weight can be firmly
attached on it.
DYNAMIC BLADE
BALANCING KIT
09
29
Suggested Maintenance
01. Because of the fan’s natural movement, some connections may become
loose. Check the support connections, brackets, and blade attachments
twice a year. Make sure they are secure. It is not necessary to remove fan
from ceiling bracket.
02. Clean your fan periodically to help maintain its new appearance over the
years. Use only a soft brush or lint-free cloth to avoid scratching the finish.
The plating is sealed with a lacquer to minimize discolouration or tarnishing.
Do not use water when cleaning. This could damage the motor, the wood,
or possibly cause an electric shock.
03. You can apply a light coat of furniture polish to the wood blades for
additional protection and enhanced beauty. Cover small scratches with a
light application of shoe polish.
04. There is no need to oil your fan. The motor has permanently lubricated
sealed ball bearings.
10
MAINTENANCE
CARE OF YOUR FAN
Turn the fan on (use the speed that causes the most wobble). Observe if
the wobble is better or worse. Turn the fan off and move the clip to the
next blade. Do the same for all blades and note on which blade the clip
reduces the wobble most. Place the clip on the blade which showed
the most improvement. Move the clip inward and outward on this blade
and operate the fan to find the position where the clip gives the most
improvement.
