28
B
– INSTALLATION
- Installation should be done by a qualified technician according to the instructions. Our
company cannot be held responsible for any damage to people, animals or property due to
incorrect installation.
- In case the device malfunctions, turn off the device. Only a service center authorized by
the manufacturer should service the device. Ask for original spare parts.
- The ground on which the device will be placed must be flat and it must be ensured that
the device operates on a scale. Take necessary precautions against the risk of the
product tipping over.
- Connection to the electrical power supply must be made by a competent person.
- Please be sure that the voltage connected to appliance must be equal with the voltage
which is on appliance’s label.
- The ground connection of the device must be made in accordance with standards and
safety rules.
- The grounding of the device should be connected to the grounding line which is the closest
panel of electrical installation.
- Device electrical connection, main fuse and leakage current fuse must be made in
accordance with the current regulations and rules.
In places with high electrical noise, an isolation transformer and line filter should be used on
the supply line.
- If more than one electronic device is used, a separate supply line must be installed for
each device.
-
No control circuit should be connected to the supply line of the device.
- Cables that carry the sensor and input signals to the device should be carried as far as
possible and separately from the supply, control, switched inductive load cables and they
should be prevented from being affected.
-
Necessary precautions should be taken to prevent liquid leakage and metal parts to
become conductive into the device. Otherwise, accidents such as fire and electric shock
may occur.
