26
A4
– UNPAKING
- Please unpack the package according to the security codes and ordinances of current
country and get rid from the pack. Parts which contact with food are produced by stainless
steel. All plastic parts are marked by material’s symbol.
- Please check that all parts of appliance had come completely and if they are damaged or
not during the shipping.
- After the installation of the device, please throw away of the packaging materials by paying
attention to safety and environmental conditions. For reuse of waste packages, throw them
into the relevant recycling bins according to their properties (foil, cardboard, Styrofoam).
When throw away of any electrical equipment, make it unusable by cutting the cable.
B
– INSTALLATION
- Installation should be done by a qualified technician according to the instructions. Our
company cannot be held responsible for any damage to people, animals, or property due to
incorrect installation.
- In case the device malfunctions, turn off the device. Only a service center authorized by
the manufacturer should service the device. Ask for original spare parts.
- The ground on which the device will be placed must be flat and it must be ensured that
the device operates on a scale. Take necessary precautions against the risk of the
product tipping over.
- All gas connections of the device must be suitable with
ISO 7-1
or
ISO 228-1
standards.
- Before the gas connection of the device is made by the authorized service personnel, the
gas connection must be made according to the specified gas type and pressure by checking
the label. Connection should not be made according to different types of gas and / or
pressure.
- Gas connection inlet dimensions are defined in the
TECHNICAL DATA
chart.
- After the device is connected to the gas system, gas leakage absolutely must be checked
with soap bubbles.
- After the device is controlled by the authorized service personnel, air adjustment is made if
deemed necessary.
- In order for this device to be positioned close to the wall, kitchen furniture, decorative
covering, etc., if these are made of fireproof material or covered with a suitable non-
flammable heat insulation material, the distance between them must be at least 5 cm,
otherwise 20 cm. The device should be operated under a chimney hood.
-
Any intervention to the valves and injectors other than the declared power of the
device does not cover the warranty.
Summary of Contents for Omk.MLP01.N11.0040.000
