23
D
– OPERATION INFORMATION
Figure 1
A:
TIMER
B:
RED LED
C:
GREEN LED
D:
TEMPERATURE BUTTON
- Usage:
The first time the device is used, the temperature setting is max. and run it idle for 30
minutes. Some odor and smoke may occur due to the insulating coating material during
operation. It will then disappear.
When you turn on the device, see that the red and green LED lights on the front are on. The
red LED will turn off when the desired temperature is reached. However, it is not sufficient
for homogeneous heating of the entire cooking area. For this, preheat the device for a
homogeneous heat distribution between 30
– 45 minutes by adjusting the heat setting to the
desired level each time it is used for the first time. Then proceed to the cooking process.
Make sure that the surfaces which will come into contact with food are clean. Pour the
mortar prepared for the waffles in an amount that will not overflow from the mold. Spread the
mortar on the mold with a spatula. Cover the top cover on the mortar and cook.
You can operate it by setting the time adjustment button to the desired time setting.
