24
C
– SAFETY INSTRUCTIONS
-
This device must be installed in accordance with current regulations and used only in
a well-ventilated area. Consult instructions for setting up the device and before use.
-
The device is made for industrial use and should only be used by personnel trained in
the device
.
-
Do not interfere with the device without using appropriate protective equipment.
-
For the long lasting of the device, never run it idle for a long time. When the device is
not used, it must be turned off. In long-term use, the device should be turned off and
rested for at least 10 minutes every 2 hours.
-
All kinds of flammable solid liquid materials (clothes, alcohol and derivatives, petro-
chemical products, wood and plastic materials, curtains, etc.) should never be kept in
the area where the device is operated.
-
Because of any reason if there is a fire or flame flare where the appliance is used, turn
off all gas valves and electric contractor switch quickly and use fire extinguisher. Never
use water to extinguish the fire.
-
Damages caused by lack of grounding connection will not be covered under warranty.
-
Do not use non-original spare parts on the device. In case you use for the device spare
parts not supplied by our company, the device will be out of warranty.
Summary of Contents for Omk.WFL21.E15.0101.Z5F
