www.microscope.com
Oversized 155 mm x 150 mm integral mechanical stage with low position coaxial
controls. Range of movement 80 x 50 mm.
Interpupillary adjustment range: 55
– 75 mm
Graduated, oversized knobs on coaxial coarse and fine (0.002mm) adjustments
Limited Lifetime Warranty
Packed in a specially molded Styrofoam shipping container
ASSEMBLY
*Use figure 1 (page 5) to aid in assembly
.
1. Remove the main body of the microscope from the foam box and place it on a
working table.
2. Install the trinocular body on the base. Tighten the screw on the right of the base
to affix the body.
3. Insert the 10x eyepieces into the eyetubes.
4. Attach the four included objectives to the nosepiece in sequence from low
magnification to high magnification. Make sure the objectives are secure.