www.microscopenet.com
9
3.9 Adjusting focus tension
The focus tension has been pre-set at the
factory. If the mechanical stage drops by itself,
rotate the tension adjustment ring (
Fig. 10
)
situated between the coarse focus knob and
microscope body on the power switch side until
the tension is in maintained.
3.10 Camera
(optional, may not included in your
package)
1) Bring the microscope into focus by following the
procedures in
3.5
.
2) Install the camera by following the procedures in
2.7
.
3) Open image observing sofeware to examine (more detai
ls see camera’s manual).
4) You also can capture images or record live videos through the software, depending
on the functions provided by the software.
Note:
Please refer to the manuals
in the camera’s CD for the details of installation and
operation of the camera.
3.11 Darkfield condensers observation
(optional, may not included in your package)
Please see section 7
(Darkfield Condenser Installation and Operation Instructions)
Focus Tension Ring
Fig.10
