www.microscopenet.com
1
i.
Caution
1. Open the carton carefully with a knife or paper cutter.
Find the “UP” sign and place
the Styrofoam container on the side that makes the arrow upward. If the
“UP” sign is
missing, please open the Styrofoam container gently to prevent any accessory, i.e.
objectives or eyepieces, from dropping and being damaged.
2. Do not discard the molded Styrofoam container; the container should be retained
should the microscope ever requires reshipment.
3. Keep the instrument out of direct sunlight, high temperature or humidity, and dusty
environments. Ensure the microscope is located on a smooth, level and firm
surface.
4. If any specimen solutions or other liquids splash onto the stage, objective or any
other component, disconnect the power cord immediately and wipe up the spillage.
Otherwise, the instrument may be damaged.
5. All electrical connectors (power cord) should be inserted into an electrical surge
suppressor to prevent damage due to voltage fluctuations.
6. Confirm that the input voltage indicated on your microscope corresponds to your line
voltage. The use of a different input voltage other than that as indicated will cause
severe damage to the microscope.
7.
Note:
please read the instruction of the operation of camera in manual
3.9
below
and the CD in the package before you start to use it.
