6
Safety and Warranty
•
Before the hand pallet truck is pushed into the elevator, the operator shall make sure that the elevator
can bear the total load of hand pallet truck and cargo as well as the total weight of the operator and other
personnel in the elevator. When entering the elevator, people should let the load enter first but not operator.
When the load or hand pallet truck enters or leaves the elevator, other personnel should not stay in the
elevator.
•
The hand pallet truck should be stored in dry and ventilated environment.
•
When the cargo weight exceeds 2500kg, please operate the truck by two person together for labor-saving.
INSPECTION BEFORE USE
If the hand pallet truck is not used for a long time, air may get into the hydraulic system. Due to this, the trouble
can be eliminated by the following method: Turn the hand knob to the drop position and rock the handle for 4 to
6 times. Then release the operation knob. If necessary, the process can be repeated for several times until the
hand pallet truck can be operated normally.
LOADING TYPE AND RATED WEIGHT
The ideal loading type is that the gravity center of the cargo is just in the middle of the truck forks. The rated
weight must be reduced when the cargo gravity center is not in the middle of the truck forks. The rated weight
is shown as the label.
OIL
The oil capacity which oil pump needs is about 250ml (or 0.25kg). According to the ISO oil criterion, the choice
of oil is 32# when the environment temperature during -5~40°C. The choice of oil is low temperature oil when
the environment temperature during -35~-5°C.
NOTE:
1.
The truck shall be used, serviced and repaired according to the manufacturer’s requirements.
2.
The truck shall not be modified or have attachments fitted without ensuring that the truck is still safe.
3. When the cargo weight exceeds 2500kg, please operate the truck by two persons together for labor-saving.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as
possible.
6 MONTHS PARTS AND LABOR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
