6
Safety and Warranty
National Electrical Code and local codes and ordinances is required.
•
Do not kink or pinch the power supply cord between the appliance and the cabinet.
•
The fuse (or circuit breaker) size should be minimum 10 amperes for the appliance.
•
It is important for the appliance to be well leveled for proper operation.
•
Remove the packing materials and clean the appliance before using.
•
If the appliance will not be used for a long time, before the next use it must be thoroughly cleaned. Follow
carefully any instructions provided for cleaning or use of sanitizing solution. Do not leave any solution
inside the appliance after cleaning.
•
DO NOT use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage or
discolor the interior. Use rubber gloves to protect hands.
•
Carefully read the material safety instructions on the container of the appliance cleaner.
•
Never allow children to operate, play with the appliance.
•
DO NOT use this apparatus for other than its intended purpose.
ELECTRICAL CONNECTION
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal
safety, this appliance must be properly grounded. The power cord of this appliance is equipped with a
3-prong grounding plug that mates with a standard 3-prong grounding wall outlet to minimize the possibility
of electric shock hazard from the appliance. Have the wall outlet and circuit checked by a qualified electrician
to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered; it is your
responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. The appliance
should always be plugged into its own individual electrical outlet which has a voltage rating that matches the
rating label on the appliance, this provides the best performance and also prevents overloading house wiring
circuits which could cause a fire hazard from overheated wires. Never unplug your appliance by pulling on the
power cord. Always grip the plug firmly and pull straight out from the outlet. When moving the appliance, be
careful not to damage the power cord.
EXTENSION CORD
Because of potential safety hazards under certain conditions, it is strongly recommended that you do NOT use
an extension cord with this appliance.
1 YEAR PARTS AND LABOUR BENCH WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see www.omcan.com/warranty.html for complete info.
