9
Installation
Operation
• A collar to protect the cylinder shut-off valve.
•
An arrangement for vapor withdrawal only.
•
A bottom ring for securing to the cylinder support assembly.
•
Protect regulator vent openings from the elements. Do not expose regulators to rain, snow or ice. Store
regulators in cabinet when not in use.
•
Only install and operate cylinders in the retaining brackets on the appliance. Cylinders must be secured
against tip-over and from heat sources at all times.
TRANSPORTATION AND STORAGE OF LP CYLINDERS
Handling, storage and transportation of propane cylinders must be in accordance with Storage and Handling of
Liquid Petroleum Gases, ANSI/NFPA 58 or Natural Gas and Propane Installation Code, CSA B149.1.
THEREFORE:
Always use the protective cap provided with your cylinder whenever it is not connected to your fryer.
•
Do not store in a building, garage or any other enclosed area. Store only in a well ventilated area.
•
Do not store in the vicinity of any gas burning apparatus or in any high heat area such as a closed car or
trunk.
•
Do not smoke while transporting a cylinder in your vehicle.
• Transport and store cylinder(s) in an upright position only.
•
Store out of reach of children.
• Allow only qualified LP gas dealer to fill or repair cylinder(s).
• Do not allow the cylinder to be over filled.
• Make sure the LP gas dealer checks the cylinder for leaks after filling.
WARNING Hot oil and parts can cause burns. Use care when operating, cleaning and servicing the
fryer.
WARNING Spilling hot frying compound can cause severe burns. Do not move the fryer without
draining all frying compound from the tank.
LEVELING THE FRYER
Check the level of the fryer by placing a level on top of the fryer. Ensure that the fryer is level front-to-back and
side-to-side in the installed position. Lock the wheels after unit is level.
OVER-TEMPERATURE SHUTDOWN
If the shortening becomes overheated, a high-temperature shutoff device will turn the gas valve off and
