5
Safety and Warranty
WARNING: contain information about actions or conditions that may cause or result in a malfunction
of your system.
The gas noodle cooker is designed for boiling pasta, noodles, vegetable etc. This cooker uses a millivolt
temperature control circuit, which requires no external power. This model adopts an open-tank design with no
tubes, which makes cleaning the water tank quick and easy. The noodle cooker requires installation of legs or
optional casters at point of use. All noodle cookers are shipped with a package of standard accessories. Each
noodle cooker is adjusted, tested, and inspected at the factory before crating for shipment. Water tanks are
constructed of welded, heavy-gauge stainless steel. Heat is supplied by two stainless steel burners, which are
installed under the tank bottom. A drain is installed at the right hand of the water tank, with a front-controlled
manual ball valve. Each noodle cooker is equipped with a thermostat for precise temperature control. The
thermostat is located at the front part of the water tank for rapid response to changes in loads and to provide
the most accurate temperature measurement. A high temperature thermostat (hi-limit) shuts off gas to the
burner assembly if the controlling thermostat fails. This unit was carefully inspected and packed before leaving
the factory. The transportation company assumes full responsibility for safe delivery upon acceptance of the
equipment for transport.
What to do if your equipment arrives damaged:
1. File a claim for damages immediately, regardless of the extent of damages.
2. Inspect for and record all visible loss or damage, and ensure that this information is noted on the freight bill
or express receipt and is signed by the person making the delivery.
RESIDENTIAL USERS: vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as
possible.
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed of
without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
