background image

5

Safety and Warranty

SAFETY.

WARNING!

THE PRODUCT IS NOT SUITABLE FOR PEOPLE WHO HAVE NOT BEEN TRAINED IN IT’S USE, OR 

PEOPLE WHO ARE INEXPERIENCE (INCLUDING CHILDREN).

NOTES FOR INSTALLATION

1. 

The supplied voltage for this equipment must be coordinated with the voltage in nameplate.

2.  User should install a suitable power switch and breaker switch near the fryer.

3. 

At the back of the equipment is the earth bolt. Please connect the earth wire in compliance with the safety 

regulations reliably with copper cable of no less that 1.5mm².

4.  The environment temperature should not be more than 300°C/572°F in the event of hot oil splashing and 

causing the fire.

5. 

The installation of this equipment must be done by professionals.

6.  Using old oil will be easy to cause over boiling, and if the food too wet or too much, also the same problem 

will happen.

WARNING!

If the oil level is less than the “MIN” level marked on the tank, there will be a risk of catching fire.

NOTICE

•  This equipment must be operated by trained cooks or professionals.

•  Do not refit it! Refitment of this product will cause serious injury.

• 

Do not clean the product with a water jet or soak the electric box into water while cleaning. Water can 

conduct electricity so the product may cause electric-shock accident by electric leakage.

• 

High temperatures can and will scald. When the unit is in use and before or after being used, do not touch 

any of the following directly because of it’s high temperature; body of trunk and chamber of top trunk.

•  Do not use another power supply with different voltage. Do not use a main switch that is not coordinated 

with safety regulations.

•  When there is thunder and lighting in the area, the user should shut off the main switch to avoid appliance 

being damaged by a power surge.

• 

Do not use hard and sharp objects to clean the surface of oven body and the surface of oil pot.

•  After using, please shut off the main switch.

• 

The installation and maintenance of electric circuits must be done by professionals.

•  If the power cord is damaged, to prevent a hazard, the user should contact Omcan to request a 

replacement.

WARNING!

• 

Daily check of the product is needed. It can prevent the accidents.

• 

If a problem is found with the electric circuit or the temperature rising is abnormal, please stop using the 

equipment immediately. And inform the professional technician to check and maintain as soon as possible.

1 YEAR PART AND LABOUR BENCH WARRANTY

Summary of Contents for CE-CN-1700-F

















Reviews: