7
Operation
• Before first use, clean the inner sides and the playing grids with a soft cloth and a mild cleaning agent.
Afterwards, dry the device thoroughly.
•
Connect the device to a single grounded power socket.
OPERATION PANEL
SET TEMPERATURE
1.
Press button: the set temperature is displayed.
Press or button to modify and store the displayed value.
Press button to exit the adjustment and display inside temperature of the unit.
If no more button is pressed within 10 seconds, the internal temperature will be displayed.
2. Light: Press button, it turns on; press again, it turns off.
3.
Heating Indicator: During heating, the LED is on; when the internal temperature is constant, the LED is off.
• Set the temperature as required for respective foods. You may adjust the desired temperature in the range
between 30°C-80°C / 86°F-176°F.
•
The temperature inside of the hot display can be read from the front display.
•
Put the foods in appropriate containers before placing them inside the hot display.
•
Some of the device parts become very hot, always use safety gloves when placing or removing foods.
•
The foods are kept warm at the temperature set by you previously.
• Switch on the inner light when required using the light switch of the device.
•
Disconnect the device from the power socket when the device is not in use.
Installation
•
Place the device on a solid and even surface which supports the weight of the device and is not heat
sensitive.
• The device should never be placed on a flammable surface (such as table cloth, carpet, ect).
• You must not position the device near open fireplaces, electric ovens, arc furnaces/electric heaters or other
heat sources.
•
Position the device in such a way that the plug is easily accessible.
