1
Dear Consumers:
Thank you for purchasing our product. In order to ensure your safety and achieve
the best out of your freezer, please read the instructions carefully.
Caution for Using
1. Unpack all packaging before using the freezer. Do not tilt freezer more than 60°
while moving it.
2. The freezer should be installed in an environment with good ventilation, Cool
and dry, and without corrosive gases. It should not be installed close to heat
sources or directly under sunlight. Leave 10cm or more between the front and
the back of the freezer. When installing, the wheels should be level and stable,
or it will cause vibration and noise.
3. On initial startup, the freezer should run empty for one hour before storing food.
4. Before placing food into the freezer, adjust the temperature control to the lowest
point (highest number) and let it run until the temperature decreases to
0°Fahrenheit. Put the food in, and after 12 hours adjust the temperature control
to the desired set point.
5. The thermostat adjusts the temperature inside the freezer. When the knob is
turned clockwise the temperatures lowered.
• Number 4 is the recommended setting
• The ’0’ setting stop operation
• On Max setting compressor will run continuously (not recommended)
6. Never store flammable, explosive or corrosive products in the freezer.
7. If power is turned off, wait at least 5 minutes before turning on again to avoid
damage to the compressor.
8. To save energy, keep door close.
9. The surface and inside of freezer should be dry and clean. Long term moisture
with cause the freezer to rust slowly.
10. Periodical cleaning is suggested. Generally, 30-45 days is best. When cleaning,
it is best to wipe the inside and the surface of the showcase with the soft cloth
using neutral soap or detergent.
11. Do not use Freezer in ambient temperatures higher than 38°Celsius
Attention: To ensure safety, the power plug must be pulled out before
cleaning. All safety precautions must be followed. Dispose of properly in
accordance with Federal or local regulations. A risk of fire or explosion due to
punctured refrigerant tubing. Follow handling instructions carefully.
DANGER: Risk of fire or explosion. Flammable refrigerant R290 used. To be
repaired only by trained service personnel. Do not use mechanical devices to
defrost freezer. Do not puncture refrigerant tubing.