6
Technical Specifications
Installation
Model
FR-CN-0160-S
FR-CN-0360-S
FR-CN-0460-S
Climate Type
N/ST
Freezer Capacity
120 L / 4.2 cu.ft.
290 L / 10.2 cu.ft.
370 L / 13.1 cu.ft.
Temperature Range
≤-26°C / (-15°F)
Refrigerant
R290
Compressor HP
1/4+
2/5+
1/2+
Amps
3
4
Tub Load Quantity
4 dis 2 stored
8 dis 6 stored
10 dis 8 stored
Weight
154.3 lbs. / 70 kgs.
242.5 lbs. / 110 kgs.
280 lbs. / 127 kgs.
Dimensions
26.2” x 28.1” x 34.4”
665 x 715 x 875mm
49.6” x 28.1” x 34.4”
1260 x 715 x 875mm
60.2” x 28.1” x 34.4”
1530 x 715 x 875mm
Item Number
44590
44588
44589
GLASS CANOPY ASSEMBLY
INCLUDED HARDWARE
•
1 - Front Rail.
•
2 - Side Rails.
• 4 - Metal Plate for Side Rails.
•
8 - L-Shaped Brackets.
• 11 - Screws and Metal Washers for Rails.
• 20 - Fasteners for Glass Panels.
Note: If the fasteners are loose after assembling, you may fasten it with the white washer.
1. Install the 3 plastic channels along the sides and front of the cabinet using the Phillips screws and metal
washers. A short channel should be installed on each side, and the long channel should be installed on the
front.
2. Insert the side glass panel into the side channel. Attach a metal plate to the cabinet at both ends of the
channel, using the Phillips screws and metal washers. Then, attach each of the metal plates to the side
glass panel using the socket head screws, metal washers, and associated metal fasteners. Repeat this
step on the other side of the cabinet.
Safety and Warranty
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
