6
Operation
Maintenance
Insert one side of the power cord into the socket of the unit, plug the other side into power supply, turn the
temperature dial clockwise to the desired setting. The temperature range is 40 - 100°C / 104 - 212°F. When not
using, just simply turn off the thermostat and unplug the power.
Clean using warm soapy water after each use. Do not immerse completely in water to clean. The appliance is
not to be cleaned with a water jet.
HELP
If the warmer does not work, please check the following:
1. The power supply is correct.
2. The element is OK.
Installation
Take out the warmer from the packaging and locate the unit on a firm level surface.
When this appliance is to be positioned in close proximity to a wall, partitions, kitchen furniture, decorative
finished, etc., it is recommended that they be made of non-combustible material, if not, they shall be clad with
a suitable non-combustible heat-insulating material, and that the closet attention be paid to fire prevention
regulations.
Once the warmer has been placed in position by consulting international standards and regulations. The
warmer is ready to operate.
