14
Troubleshooting
TROUBLESHOOTING GUIDE
This troubleshooting guide in the user manual should be read before attempting any service. Be sure to turn to
this guide only when the trouble shooting in user manual can’t help you solve the problem.
THE MACHINE DOES NOT MAKE ICE
Problem
Check part or point
Possible Cause
Probable Correction
The machine doesn’t
operate
Plug
The icemaker is
unplugged.
Plug the icemaker in.
Socket
Socket is damaged
Check and replace.
Power switch
The icemaker power
button is set at OFF.
Switch the icemaker
power button to ON.
Fuse
The fuse is blown.
Replace fuse.
Wiring connection
Some wiring connection
is incorrect or loose.
Check and re-connect.
Voltage
The voltage of the power
supply is low.
Add manostat.
Ice full probe
The ice full probe is not
working.
Replace with a new one.
Ice full probe
The ice full probe is
covered by something.
Clear the probe and
make the ice-full probe is
free of obstructions.
Wiring
Some wiring is damaged. Replace with a new one.
Electric component
Some electrical
component has failed.
Find the controller,
press the mode button
to change the mode. It
is helpful to judge which
part is out of function.
Controller
The controller has failed. Replace with a new one.
Water System
Water supply tap
The water supply tap is
turned off.
Turn on the water supply
tap.
Water supply pipe
The water supply pipe is
not properly connected or
may be kinked.
Reconnect the water
supply pipe.
