11
Operation
CONTROL PANEL
There are three indicator lights and two key on the front control panel. The lights is for providing status
information of the machine. The left key is for manual water clean function, the other key is for timer reset of air
filter routine maintenance alarms for cleaning.
Running Status
Power Light
Ice-Making Light
Ice Full Light
Cleaning
On
Flashing
Flashing
Ice Making
On
On
Off
Ice Full
Off
Off
On
Condenser Cleaning
Alarm
Flashing and Beeping
Flashing and Beeping
Flashing and Beeping
Error Status
Power Light
Ice-Making Light
Ice Full Light
Condenser Sensor
Error
*
*
Flashing
Evaporator Sensor
Error
*
Flashing
*
Water Shortage
One Flash
One Beep
*
*
High Pressure
Two Flashes
Two Beeps
*
*
Bin Full Sensor Error
Three Flashes
Three Beeps
*
*
Temperature Error
Four Flashes
Four Beeps
*
*
Water Level Error
Five Flashes
Five Beeps
*
*
Harvest Overtime
Six Flashes
Six Beeps
*
*
Ice Making Overtime
Seven Flashes
Seven Beeps
*
*
ICE THICKNESS ADJUSTMENT
Observe the first ice cube harvest and check size of the ice cubes; if an adjustment is necessary, turn the
adjustment screw clockwise to increase ice thickness, counterclockwise to decrease ice thickness. Every 1/3
circle turn will increases or decrease 1.5mm as shown as below illustration.
