9
Technical Specifications
Installation
Model
IC-CN-0129S
IC-CN-0219S
IC-CN-0329
IC-CN-0529
Power
446 W
526 W
790 W
1113 W
Electrical
115V / 60Hz / 1
Bin Capacity
40 lbs. / 18 kgs.
80 lbs. / 36 kgs.
275 lbs. / 125 kgs.
375 lbs. / 170 kgs.
Production Per Day
120 lbs. / 55 kgs.
210 lbs. / 95 kgs.
350 lbs. / 160 kgs.
500 lbs. / 225 kgs.
Ice Shape
Cube
Half or Full cube
Max Ambient
Temperature
5 - 40°C | 41 - 104°F
Condenser Unit
Air
Refrigerant
R290
Weight
99.2 lbs. / 45 kgs.
127.9 lbs. / 58 kgs.
187.4 lbs. / 85 kgs.
242.5 lbs. / 110 kgs.
Packaging Weight
110.2 lbs. / 50 kgs.
145.5 lbs. / 66 kgs.
207.3 lbs. / 94 kgs.
264.6 lbs. / 120 kgs.
Dimensions
19.7” x 23.2” x 35.4”
500 x 590 x 900mm
26” x 27” x 38.2”
660 x 685 x 970mm
22” x 32.7” x 67.6”
560 x 830 x 1718mm
29.9” x 32.7” x 67.6”
760 x 830 x 1718mm
Packaging
Dimensions
22.8” x 26.4” x 32.9”
580 x 670 x 835mm
30.7” x 29.3” x 35.4”
780 x 745 x 900mm
Unit: 25.8” x 29.5” x 24.4”
655 x 750 x 620mm
Unit: 33” x 29.5” x 24”
845 x 750 x 620mm
Bin: 25.4” x 35” x 41.5”
645 x 890 x 1055mm
Bin: 33.4” x 35” x 41.5”
850 x 890 x 1055mm
Item Number
47483
47484
47485
46452
The ice machine should be installed in a proper location meeting the following conditions:
• Indoor, not more than 2,000 meters above sea level.
• Ambient temperature cannot exceed 32°C.
• Power supply: the rated voltage indicated on the machine nameplate ±6%.
• Water source: potable water, with water pressure from 1.3 Bar to 5.5 Bar; water temperature: 5-35°C.
• The ice machine should be kept away from heat sources, and should be strictly forbidden to use at
extremely high temperature or low temperature environment, and should avoid direct sunlight.
• There should be sufficient ventilation space around the ice machine and keep good ventilation; the distance
from the ice maker to the wall should be no less than 30 cm for the front, 15cm for the sides, and 20 cm for
the rear.
• The ice machine must be placed on a floor sufficient to support its weight.
• Socket for the ice maker must be reliably grounded and with leakage protection.
• Proper floor drainage must be provided near the installation location of the ice machine.
INSTALLATION STEPS
1. Check if the ice machine is in good condition and the accessories are complete; check the machine model
and the machine nameplate.
