Omcan PM-IT-0002, Instruction Manual

5

Safety and Warranty

or grease by hand any moving parts of the machine. In addition, all repair and setting operations of any 

moving parts with the motor running, are prohibited, unless the necessary precautions to prevent any 

accidents have been taken beforehand.

•  All moving parts are fitted with adequate guards and protections. Always remount them after removal for 

servicing.

WEAR ADEQUATE CLOTHING

Be sure to wear tight-fitting clothing without any loose parts. Never wear open or unfastened jackets, shirts or 

overalls.

IMPORTANT

To prevent accidents and ensure best performance the machine must not be modified or altered unless 

authorised by the manufacturer. Nor must it be used in conditions or for purposes other than those for which it 

has been expressly designed. Any arbitrary modification implemented in this machine will automatically exempt 

the manufacturer from any liabilities for ensuing damage or injury. This machine has been designed and 

engineered in conformity to European directives 89/392 EC, 91/368 EC, 93/44 EC and 93/68 EC.

ELECTRICAL SHOCK

For your own personal safety, before connecting the machine to mains:

•  Check that power mains leading to distribution socket is fitted with an appropriate multipolar switch 

protected against overloads and shortcircuits.

• 

Carry out all phase connections, as well as any neutral and ground connections (compulsory) with a 

standard plug compatible with the above mentioned socket. The protection lead (ground) is the one 

with the yellow/green insulating sheath; make sure that the power supply cable is appropriate to its use, 

according to length, mains voltage and machine consumption.

•  Unless adequate protections against electrical shock are fitted, do not operate the machine in damp or wet 

environments.

Strictly do not start up the machine without the protective panelling. This may jeopardise personnel 

safety and machine serviceability.

1 YEAR PARTS AND LABOUR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either 

an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the 

equipment.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures not 

improper use.

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components (cardboard, polyethylene, and others) are classified as normal solid urban waste 

and can therefore be disposed of without difficulty.