Omcan PM-IT-0008, Instruction Manual

5

Safety and Warranty

time spent in reading will save time and extra work.

Read this manual thoroughly before proceeding with start-up, use, maintenance and other operations. Read 

and rigorously follow the herein contained instructions and recommendations:

•  Read all warning labels applied to any part of the machine, and promptly replace them when they become 

worn or illegible.

•  Only trained and authorised personnel should operate the machine.

•  If any part jams or locks up, before clearing make sure you first switch off the motor. DO NOT clean, oil 

or grease by hand any moving parts of the machine. In addition, all repair and setting operations of any 

moving parts with the motor running are prohibited, unless the necessary precautions to prevent any 

accidents have been taken beforehand.

•  All moving parts are fitted with adequate guards and protections. Always remount them after removal for 

servicing.

•  Wear adequate clothing. Be sure to wear tight-fitting clothing without any loose parts. Never wear open or 

unfastened jackets, shirts or overalls.

IMPORTANT:

 To prevent accidents and ensure best performance the machine must not be modified or altered 

unless authorised by the manufacturer. Nor must it be used in conditions or for purposes other than those for 

which it has been expressly designed. Any arbitrary modification implemented in this machine will automatically 

exempt the manufacturer from any liabilities for ensuing damage or injury. This machine has been designed 

and engineered in conformity to European directives 89/392 EC, 91/368 EC, 93/44 EC and 93/68 EC.

•  Be sure to read important messages. Information highlighted as “Important” in the Operator’s Manual and/

or machine indicate specific instructions about settings, maintenance and so on. Failure to comply with 

these instructions may lead to damage to the machine.

ELECTRICAL SHOCK

For your own personal safety, before connecting the machine to mains:

•  Check that power mains leading to distribution socket is fitted with an appropriate multipolar switch 

protected against overloads and short circuits.

•  Carry out all phase connections, as well as any neutral and ground connections (compulsory) with a 

standard plug compatible with the above mentioned socket. The protection lead (ground) is the one 

with the yellow/green insulating sheath; make sure that the power supply cable is appropriate to its use, 

according to length, mains voltage and machine consumption.

•  Unless adequate protections against electrical shock are fitted, do not operate the machine in damp or wet 

environments.

Strictly do not start up the machine without the protective panelling. This may jeopardise personnel 

safety and machine serviceability.

1 YEAR PARTS AND LABOUR WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized 

service technician to repair the equipment locally.