background image

6

Technical Specifications

Model

PM-IT-0008

PM-IT-0015

PM-IT-0040

Tank Capacity

8.8 lbs. / 4 kgs.

13 lbs. / 5.9 kgs.

1

st

: 26 lbs. / 11.8 kgs.

2

nd

: 17.6 lbs. / 8 kgs.

Power

0.75 HP / 0.56 kW

1 HP / 0.75 kW

1.5 HP / 1.12 kW

Output / hr.

17.6 lbs. / 8 kgs.

33 lbs. / 15 kgs.

88 lbs. / 40 kgs.

Electrical

110V/60Hz/1Ph

220V/60Hz/1Ph

208V/60Hz/3Ph

Weight

143.2 lbs. / 65 kgs.

242.5 lbs. / 110 kgs.

385 lbs. / 175 kgs.

Dimensions (DWH)

12.5” x 22” x 29”

318 x 559 x 737mm

15” x 35” x 36”

381 x 889 x 914mm

22” x 40.5” x 36.6”

559 x 1029 x 930mm

Item Number

13364

13397

13440

Model

PM-IT-0025

PM-IT-0025-T

Tank Capacity

26 lbs. / 11.8 kgs.

Power

1.5 HP / 1.1 kW

Output / hr.

55 lbs. / 25 kgs.

Electrical

220V/60Hz/1Ph

208V/60Hz/3Ph

Weight

297.6 lbs. / 135 kgs.

Dimensions (DWH)

18.5” x 36” x 36” / 470 x 914 x 914mm

Item Number

16643

13236

Safety and Warranty

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not 

improper use.

Please see www.omcan.com/warranty.html for complete info.

WARNING:

The packaging components are classified as normal solid urban waste and can therefore be disposed of 

without difficulty. 

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated 

waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Summary of Contents for PM-IT-0008





































Reviews: