Omcan PM-IT-0080, Instruction Manual

6

Installation

Safety and Warranty

Technical Specifications

TRANSPORTATION AND HANDLING

The machine, pallet-mounted at origin, is shipped enclosed in appropriate packaging and strapped to the 

wooden pallet itself. Apart from the machine, you can find the operating instructions and the conformity 

declaration to the EC 89/392 directive. The accessories furnished and the cutting groups must be put inside 

the packing case, suitably wrapped and protected. When unloading the machine from the transport vehicle, lift 

at the points marked on the packaging using suitable equipment. Unless you need to check the contents, you 

are recommended not to open the packaging until the moment of installation. After opening the case, remove 

packaging, straps, packaging and polystyrene strips. Dispose of this material according to the regulations 

in force. Lift the machine and place on the installation site and take-away the support pallet, using a hoist of 

appropriate capacity.

The lifting and positioning of the machine must be carried out by at least two people.

To position the machine definitively or when moving it for cleaning insert the tip of the lever in its proper hole 

(Fig.18) fully equipped with wheels; thereafter, pull the lever downwards in order to lift the machine to a forward 

position (Fig.19). At this point the machine is ready to be moved and can easily be put in its final position. Make 

sure that the manoeuvring board is horizontal and compact. To move the machine, lean on it in order to push 

it, while remembering always to keep the lever pressed downwards and make sure that there are no obstacles 

or impediments along the way that may prevent the normal rotation of the wheels. At the end, carefully release 

the lifting lever and check that the machine is firmly established on its four foot-supports.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Model

PM-IT-0080

Tank Capacity

110 lbs. / 50 kgs.

Power for Worm

5.5 HP / 4.1 kW

Power for Paddle

2.5 HP / 1.86 kW

Output per Hour

176 lbs. / 80 kgs.

Electrical

208V / 60Hz / 3

Weight

948 lbs. / 430 kgs.

Dimensions

53.1” x 33” x 63” / 1350 x 840 x 1600mm

Item Number

13286