11
Operation
Maintenance
STARTUP
•
The compressor is ready to operate. Plug in the cooler.
• DIGITAL THERMOSTAT are factory-set to give refrigerators an approximate temperature of 35°F, Allow
unit to function several hours, completely cooling cabinet before changing the control setting. Temperature
Control Location and Settings.
- Electronic temperature control is located on front of unit.
• Excessive tampering with the control could lead to service difficulties. Should it ever become necessary to
replace temperature control.
NOTE:
If the unit is disconnected or shut off, wait five minutes before starting again.
RECOMMENDATION:
Before loading product we recommend you run your unit empty for two to three days.
This allows you to be sure electrical wiring and installation are correct and no shipping damage has occurred.
Remember, we does not cover product loss!
CLEANING THE CONDENSER COIL
REQUIRED TOOLS
- Phillips screwdriver.
- Stiff bristle brush.
- Adjustable wrench.
Installation
3. Make sure drawer tracks are in the right position.
Summary of Contents for RE-CN-0036-C
