6
Operation
Before use:
Plug the refrigerator into 110V exclusive socket. Unit must have independent breaker. After the refrigerator is
running, test the air suction to confirm that it is sufficiently cold. Then you may put food and drinks inside, once
unit reaches temperature.
Parameter Settings
Factory intial Setting:
E1=-1, E2=8, E3=6, E4=3, E5=2, E6=0, F1=25, F2=3, F3=15, F4=0, C1=0.
Please adjust E5 setting as below according to different ambient temperature range:
Ambient Temp(°C)
E5 setting
Other Setting
25 - 27
2
NO change
22 - 24
3
NO change
19 - 21
4
NO change
15 - 18
5
NO change
Remark:
The ambient temperature for this unit is better under 27 degree. If the ambient temperature is over 27
degree,the units can work,but the efficiency of unit decline and the compressor is difficult to stop. The setting
for over 27 degrees is same as the range of 25-27 degree.
Handling and Assembly
Protect cables
Never break or damage the cables as this may cause
electrical shock.
No water flushing
Never give the refrigerator surface a flush otherwise
electrical shock may occur.
Avoid flammable and explosive objects
Never put any flammable or explosive items inside
the refrigerator such as gasoline or alcohol. Never put
any dangerous product nearby the refrigerator.
No spray
Do not spray the unit with a flammable substance
such as paint. This may result in a fire.
After power break
After power break or unplugging the refrigerator,
always wait at least 5 minutes before starting the
refrigerator again.
No medicine
No medicine is allowed to be kept inside the
refrigerator.
Summary of Contents for RS-CN-0250
