background image

5

Safety and Warranty

IMPROPER USE

1.  Do not place food in the channel and press with the plunger before you have started the machine.

2.  Cleaning in a jet of water or a high pressure spray is prohibited.

3.  The base must not be immersed in water.

4.  Never use the appliance if the power cord is damaged. It must be replaced by either a SANTOS approved 

dealer or a person with similar qualifications to avoid any danger.

5.  The appliance must be unplugged before any intervention on it: cleaning, general care, maintenance.

6.  It is forbidden to operate the appliance on a surface with a slope in excess of 10° with respect to the 

horizontal plane. The feet of the machine must always be resting on this surface.

7.  The use of spare parts other than certified original SANTOS parts is prohibited.

8.  Never connect several appliances to the same power socket.

9.  Never use the machine outdoors.

10. Never place the appliance close to or on a source of heat.

11. This appliance is a professional machine designed exclusively for professional use. It is not designed for 

household use.

12. This appliance is not designed for use by people (including children) whose physical, sensorial or mental 

capacities are impaired or by people with no experience or knowledge, unless they have been supervised 

or given training in the use of the appliance beforehand by a person responsible for their safety. Supervise 

children to ensure they do not play with the appliance.

Line protection: The appliance shall be connected only to a power 2-pole and earth socket supplied 

by a branch circuit of suitable voltage. The branch circuit shall have been established by a qualified 

electrician according to national and local codes and laws, and provided with suitable protective 

equipments (such as fuse, circuit breaker, etc.) as defined by these codes and laws.

CARE:

•  Before connecting the machine, check that the mains electrical voltage is the same as the voltage for your 

appliance. Its value is shown: 

- Either on the identification plate under the machine. 

- Or on the identification plate on the last page of this manual.

•  If the power cable is damaged, it must be replaced by either a SANTOS approved dealer or a person with 

similar qualifications to avoid any danger.

1 YEAR PARTS AND LABOUR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either 

an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the 

equipment.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not 

improper use.

Please see https://omcan.com/disclaimer for complete info.

Summary of Contents for Santos 09

















Reviews: