9
Maintenance
initialize the appliance (hold the 2 push buttons (4) and (5) down for 2 seconds). If the problem persists, switch
off the power supply to the machine (unplug the power cord from the mains socket) and call in the maintenance
service or contact a Omcan approved dealer.
MOTOR OVERHEATING SAFETY FEATURE:
In the event of the motor overheating, the appliance stops automatically. The protection device is reset
automatically, wait for the motor to cool down (15 to 30 seconds) before starting the machine back up.
If the problem persists, switch off the power supply to the machine (unplug the power cord from the mains
socket) and call in the maintenance service or contact a Omcan approved dealer.
SAFE ACCESS TO THE TOOLS:
The appliance can only be started up if the cover (1) is closed.
•
Opening the cover (1) will stop the machine and the moving parts. The machine is started back up as soon
as the cover is closed (1).
•
A cut in the mains power supply will stop the machine. One of the two push buttons (4) or (5) must be
pressed in order to start the machine back up.
For safety reasons, do not place your finger or part of your hand into the crushed ice outlet opening, even if it is
blocked up by a clump of crushed ice. In this case, refer to the “Troubleshooting” section.
MAINTENANCE:
Before carrying out any work on the appliance, it is essential to unplug it from the mains and to discharge the
motor starting capacitor.
IMPORTANT:
Use of spare parts other than certified original parts is prohibited.
This machine requires no particular maintenance because the bearings are lubricated for life.
If work is required to replace worn parts such as the crushing blades, electrical or other components, refer to
the parts list (see exploded view at the end of the manual).
Troubleshooting
FAULT FINDING
Carefully determine the reason for the appliance stopping. In all circumstances, if the problem persists, switch
off the appliance (unplug the mains power cord plug) and call on someone from the maintenance department
or contact an approved Omcan dealer.
