Omcan Santos 55, Instruction Manual

5

Safety and Warranty

stones, etc.).

5. 

For electrocution risk protection reasons, never plunge the base into water or any other liquid.

6. 

Use a hose nor a pressure hose for cleaning: this is forbidden.

7.  Never touch the moving parts.

8. 

The appliance must not be used on any surface which has a slope of more than 10° relative to horizontal. 

The machine’s 4 feet must always be resting on that surface.

9. 

Unplug the appliance before carrying out any work on it: cleaning, maintenance or repair.

10. 

Do not use the appliance if the power supply cord is damaged. It must be replaced by either a Omcan 

approved dealer or a person with similar qualifications to avoid any danger.

11. 

The use of spare parts other than certified Omcan original parts is prohibited.

12. 

Turn the On/Off switch (11) to “0” when the appliance is not operating.

13. Connect several appliances to the same power socket.

14. Use the appliance outdoors.

15. Never place the appliance close to or on a source of heat.

16. This appliance is a professional machine designed exclusively for professional use. It is not designed for 

household use.

17. 

This appliance is not designed for use by people (including children) whose physical, sensorial or mental 

capacities are impaired or by people with no experience or knowledge, unless they have been supervised 

or given training in the use of the appliance beforehand by a person responsible for their safety. Supervise 

children to ensure they do not play with the appliance.

ELECTRICAL CONNECTION

Line protection: The appliance should be connected to a standard 2-pole + ground electric socket. The 

installation should be fitted with an RCD and a fuse rated at 16A. The appliance must be grounded.

CARE

• 

Before connecting the machine, check that the mains electrical voltage is the same as the voltage for your 

appliance. Its value is shown:

► Either on the identification plate under the machine.

► Or in the technical specifications in this manual.

•  If the power cable (10) is damaged, it should be replaced by a special assembly available from approved 

Omcan dealers or from Omcan.

•  Check that the On / Off switch (11) is in the 0 position before connecting the power cable plug (10) to your 

mains electric power socket (fig. A).

USING FOR THE 1ST TIME:

Carefully clean the parts in contact with the coffee (fig. A).

•  Take off the lid (1), the bean container (2) and the ground coffee collector (3) and wash them with a 

standard dish washing product.