Omcan Santos 55, Instruction Manual

8

Operation

changing the display mode.

Note: On turning on the power or after having changed the timer values, “mode 1” is automatically 

active. Operating either of the 2 measure selection keys, or changing the timers, activates the active 

display mode before the appliance stops.

MODE 1: DISPLAY OF THE TOTAL MEASURES DISTRIBUTED

The Total counter cannot be reset;

Mode 1 display format “XXXXX” i.e. “00001” to “99999”.

MODE 2: DISPLAY OF THE PARTIAL MEASURES DISTRIBUTED SINCE LAST RESET

Partial counter initialization.

Pressing and holding down both the “1 cup” and “2 cups” selection keys for 2 seconds causes the Partial 

counter value to flash. After flashing 3 times, the value is reset to zero.

Mode 2 display: “PXXXX” i.e. “P---1” to “P9999”.

MODE 3: DISPLAY OF THE CURRENT SELECTION (THE COUNTERS ARE HIDDEN)

Mode 3 provides the means for hiding the counters.

Mode 3 display:

“__1__” for the 1 cup selection

“__2__” for the 2 cup selection

STARTING UP

ASSEMBLY AND PREPARATION (FIG. A)

1. 

Clip the ground coffee collector (3) onto the base (4).

2. 

Place the bean container (2) on the grinder unit adjustment nut (5).

3. 

Pour the roasted coffee beans into the bean container and put the lid on the bean container.

4. 

Open the bean container shutter (6).

USING

1. 

Switch the electric current on to the machine by putting the On / Off switch (11) to the 1 position (the control 

panel display (19) shows the total number of measures dispensed) (fig. A).

2. 

Press the selector button (20 or 21) according to your selection (1 coffee or 2 coffees).

3. 

Place the filter holder under the measurer outlet (23) using the filter holder support (24) to help.

4. 

The coffee beans are then ground by the grindstones and the grounds come out of the grinder unit to fill the 

filter holder.

5. 

Remove the filter holder and tamp down the coffee with the tamper (15).

Note: If the 1 coffee button is already selected and you want to make 1 coffee again, you do not need 

to press the 1 coffee button again. Simply put the filter holder under the coffee outlet tube to obtain the 

measure selected. If the 1 coffee button is already selected and you want to make 2 coffees, you have 

to press the 2 coffees button and then place the filter holder under the coffee outlet tube to obtain the 

measure selected.