5
Safety and Warranty
At the time of use, maintenance or scrapping of the appliance, always ensure that the following elementary
precautions are adhered to. Read the explanatory instructions in full Keep this user manual
Note: for easier understanding of the sections below, please refer to the diagrams at the end of the
manual.
INSTALLATION AND HANDLING
Note: for all handling operations including unpacking the machine, the coffee bean hopper or its cover
must not be used to hold or lift the appliance.
You are advised to have 2 people to handle the machine to avoid any risk of back injury. For ease of use, it is
recommended that the machine is placed on a table or work surface so as to have the bag grip (13) in front of
you (recommended height: 90 cm, to be adapted as required to the user).
1. 1. Never operate the machine with no coffee beans in the bean hopper.
2.
Never use this machine to grind anything other than roasted coffee beans.
3. Remove from the coffee beans any foreign bodies which may damage the grindstones (metal staples,
stones, etc.).
4.
Turn the On/Off switch (8) to “0” when the appliance is not in operation.
5. Cleaning in a jet of water or a high pressure spray is prohibited.
6. The base must not be immersed in water.
7.
Never use the appliance if the power cord is damaged. It must be replaced by a special unit available from
an approved Omcan dealer or from Omcan itself.
8. The appliance must be unplugged before any intervention on it: cleaning, general care, maintenance.
9. It is forbidden to operate the appliance on a surface with a slope in excess of 10° with respect to the
horizontal plane. The feet of the machine must always be resting on this surface. The machine motor
centre line must always be vertical with respect to the surface on which it is placed.
10. The use of spare parts other than certified original Omcan parts is prohibited.
11. Never connect several appliances to the same power socket.
12. Never use the machine outdoors.
13. Never place the appliance close to or on a source of heat.
14.
This appliance is a professional machine designed exclusively for professional use. It is not designed for
household use.
15. This appliance is not designed for use by people (including children) whose physical, sensorial or mental
capacities are impaired or by people with no experience or knowledge, unless they have been supervised
or given training in the use of the appliance beforehand by a person responsible for their safety. Supervise
children to ensure they do not play with the appliance.
ELECTRICAL CONNECTION
• The appliance’s power supply is 110-120 V 50/60 Hz.
• Line protection: the appliance must be connected to a standard 2 pole + ground socket. The set-up must
be fitted with a differential circuit breaker and a 16A fuse. Grounding of the appliance is compulsory.
Summary of Contents for Santos 63
Page 12: ...12 Figure Drawings...
Page 13: ...13 Figure Drawings...
Page 14: ...14 Parts Breakdown Model Santos 63 44636...
Page 17: ...17 Electrical Schematics Model Santos 63 44636...