6
Installation
Operation
Set the sealer on a stable horizontal surface. Make sure ventilation is not blocked by any obstacle. Check that
the operating voltage for the unit corresponds to available grid voltage. Also check that the plug has a ground
connection since this appliance has insulation and is equipped with a device for connection to the safety
ground conductor in accordance with the provisions for class 1 appliances (CEI 64 8 Standards) and must be
firmly connected to ground. The power outlet must be able to furnish at least 110 V of power.
Set sealing timer on number four (4). Insert the product into a large bag. Lift the mobile cover. Position the
mouth of the bag one (1) centimeter beyond the black seal. Lower the cover and press the pump push-button,
putting pressure downwards so that the needle on the vacuum gauge goes past position 0.2. When the
vacuum is made and the vacuum gauge needle has stabilized, then press sealing push-button and wait until
the vacuum pump automatically turns off.
Safety and Warranty
Technical Specifications
and can therefore be disposed of without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Model
VP-IT-0330
Type Seal Bar
13” / 330mm
Cycle Time
20-30 sec
Electrical
110V/60/1
Weight
22 lbs. / 10 kgs.
Dimensions
14.5” x 12” x 6” / 368 x 305 x 152mm
Item Number
14407
