8. Use and maintenance manual
B01.10-B01.12
San Maurizio C.se - 11/07/2018
www.omcr.it
Before each lifting, handling or overturning of the die be sure that:
the ropes / chains are secured in correct way;
the ropes / chains are not in contact with cutting edge;
the ropes / chains are not hooked to the die corners.
WARNING
3.9
Don’t stand or transit nearby the load during lifting or handling operations (see
Pic.6
).
In case of accidental release of the load there may be risks of injury.
WARNING
3.10
Pic.6
Don’t make lifting/handling with slings that have an angle of over 90° to the horizontal level,
in opposed case can happen the extraction of the pin with the risk of load fall (see
Pic.5
).
WARNING
3.8
Pic.5
50°
<50°
