OMD Technology Instructions for Use of 5000w Tungsten
3
5. ARTICLE DESCRIPTION
OMD TECHNOLOGY 5000 WATT TUNGSTEN UNDERWATER LIGHT
A. HIGH TEMPERATURE PROTECTIVE GLASS
Do not touch glass during or after operation of the light. The glass reaches high temperatures and can
cause skin burns if touched. If the glass is cracked or damaged, cease use and contact your supplier.
B. FRONT HOUSING RING
4 x 5mm screws are located in the top of this ring. These are used to attach the separate reflector. Refer to
instructions on page 8.
C. MID-FRONT HOUSING RING
D. MAIN
HOUSING
BODY
E. 8 PIN UNDERWATER BULKHEAD PLUG
Refer to Page 5-9 for ‘Preparation for use’ and page 10 of Quick guide to 8 pin connector
F. RETAINING
COLLAR
Refer to Page 5-9 for ‘Preparation for use’ and page 10 of Quick guide to 8 pin connector
G. PULL DOWN CLIP
Stainless steel clips should all be in the lock-down position. Simply lock back down if pulled up by fouling or
transit.
H. BAIL ARM MOUNTING CLAMP
I. BAIL
ARM
J. LOCK
OFF
HANDLE
Turn anti-clockwise to unlock bail arm. Do not unwind handle completely off.
K. RECEIVER
Designed for use with industry-standard 5/8 spigots.
