AirWatt - Installation and operating manual
Connection
Place AirWatt on flat surface. Connect oil circuit and water installation on the device as
demonstrated on the picture below.
Oil circuit installation requires special interference with compressor construction. Only
authorized personnel are allowed to install the unit.
Connection of oil circuit:
-
Must be performed by Omega Air or by authorized and trained professional.
-
Compressor oil circuit is required.
-
Establish pipe connection between compressor and AirWatt unit.
-
Replenish oil in compressor separator to prescribed level. AirWatt and connecting
circuit between compressor has some volume and holds certain capacity of oil.
Connection of AirWatt will therefore lower oil level in compressor separator.
Connection of water circuit:
-
Must be performed by plumber or heating systems installer.
-
Connect water pipes to inlet and outlet connections.
-
Install suitable water pump with option of flow regulation.
