omega altise
4
ASSEMBLY OF YOUR PEDESTAL FAN FOR ROUND BASE
Loosen the height adjustment ring and extend the support pole.
Initially the support pole will be held tightly in place. If necessary, use a pair of pliers
to grasp the support pole and pull it into position.
To assemble the safety grille and blade assembly, remove the spinner (by turning it
clockwise), then the locking nut (by turning it anticlockwise) from the motor spindle.
Operating Instructions
Remove the cable tie and unravel the cordset before operation.
The fan and motor assembly are attached to a 3-position ratchet. Tilt up or down
until the assembly clicks into the desired position.
Press speed button to adjust between low-medium-high settings.
Press button 1 for a low speed
2 for a medium speed and
3 for a high speed
Press 0 to switch the Pedestal Fan off.
