OMEGA ALTISE
CLEANING & MAINTENANCE
WARNING:
ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING, DO NOT
IMMERSE APPLIANCE IN WATER!
The fan should be cleaned periodically (at least once a month depending on the build-up of dust).
Clean the body of the USB desk fan with a soft damp cloth. Always make sure that the appliance is completely dry before
connecting back to the power supply.
CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc. as they will damage the USB desk fan. NEVER use
ALCOHOL OR SOLVENTS.
Remove the guard to clean the fan blades and around the motor with a damp cloth. Unscrew the screw at the side of the
front guard, rotate slightly anti-clockwise to loosen the guard and remove.
Once clean, refit the front guard. Place the front guard back on the body and line up the screw with the line to the left on
the front guard. Rotate clockwise slightly so the screw lines up with the line to the front. The screw & screw hole are now
in line – screw back into place so front guard is secure.
Do not disassemble the fan in any other manner.
STORAGE: Store the USB desk fan with these instructions in the original packaging, in a cool, dry place.
It is important that you retain these instructions, proof of purchase as well as other important
documents about this product for future reference. Due to continual product development,
Omega Altise reserves the right to alter specifications or appearances without notice.
Dispose of packaging responsibly – recycle where facilities are available.
A division of Shriro Australia Pty Ltd
104 Vanessa St Kingsgrove NSW 2208
In Australia: 1300 795 572
In New Zealand: (09) 415 6000
www.omegaaltise.com
IM Ref: OD152W 28/2014/05
