OMEGA ALTISE
TECHNICAL DETAILS
Model: OHVP46C pedestal fan.
Power: 220-240V 50Hz, 120W.
Weight: 9kg.
Dimensions (HxWxD): 119-160x56x40cm.
PARTS
PART DESCRIPTION
01 L-Screw
02 Washer
03
Base Weight Insert
04 Decorative
Base
05 Screws
(4)
06 Base
Tube
07 Decorative
Cap
08
Tube Locking Nut
09 Extension
Tube
10 Fan
Head
GETTING STARTED – ASSEMBLY
1.
Carefully remove the appliance parts from the plastic bag and the carton, and unwind the cord to its full length.
2.
Place the Base tube on top of the Decorative Base. Lift the Decorative Cap and screw in place with the four screws.
3.
Place the Base Weight Insert inside the Decorative Base and fix in place using the Washer and L-Screw.
4.
Place the Fan Head onto the Extension Tube and lock in place by hand tightening the screw at the back (do not
over-tighten).
5.
Adjust the height of the pedestal fan by loosening off the Tube Locking Nut, adjusting the extension tubes and then
re-tightening.
6.
Adjust the speed control at the rear of the Fan Head to 0 (off). Plug the cord set into a 230-240V~A.C. 50Hz earthed
electrical outlet. Place on a level, smooth, stable surface. Turn the power on at the electrical outlet.
