omega altise
3
Parts List
1. Dustproof
cover
2. Control
housing
3. LCD
display
4. Front
cover
5. Rear
cover
6. Extension
tube
7. Pedestal
tube
8. Front
base
9. Rear
base
10. Screw
11. Remote control
Assembly Instructions
1. Remove all items of packaging from the
tower fan.
2. Turn the tower body upside down and
position the rear base (9) onto the
support posts of the front base (8) to
create the base assembly.
3. Pass the power cord through the hole in
the middle of the base assembly.
4. Position the base assembly onto the
pedestal tube (7). The front base has a
hole that corresponds with a round lug on
the pedestal tube.
5. Position the power cord into the provided
cord track in the rear base.
6. Screw the base assembly onto the
pedestal tube with the supplied screws
7. Turn the tower fan back to an upright
position. It is now ready for use.
