(c). Press "
" key to enter the offset setting mode, the
“
OFFSET
” symbol is displayed.
(d). Press or key to select the desired T1, T2, T3 or T4.
(e). Press or key to set the desired offset values.
(f).. Press "
" key to store the offset value.
(g). Press “
SET
” key to exit this mode.
The temperature measurement plus the offset appears in the
display. Remember to set the offset to 0.0 when it is no longer
needed. The “
OFFSET
” symbol will disappear when the offset
values all are 0.0.
4. Auto Power Off Time setting :
(a). Press " " key to turn on the meter.
(b). Press “
SET
” key to enter the setting mode, then press or
key until the display shows “
SEt SLEEP
”.
(c). Press "
" key to enter the auto power off time setting mode,
the “
SLEEP
” symbol is displayed.
(d). Press or key to choose the desired auto power off
time. The choices are: 5, 15 and 30 minutes.
(e). Press "
" key to store the choice.
(f). Press “
SET
” key to exit this mode.
5. Alarm High / Low Limit setting :
(a). Press " " key to turn on the meter.
(b). Press “
SET
” key to enter the setting mode, then press or
key until the display shows “
SEt ALArn
”.
(c). Press "
" key to enter the alarm high limit and low limit
setting mode, the “ ALARM ” symbol is displayed.
(d). Press or key to select the desired T1, T2, T3 or T4.
(e). Press "
" key to enter the high limit value setting, the “ ”
symbol is displayed.
(f). Press or key to set the desired alarm high limit value,
the resolution of setting value is 0.1 degree, regardless of
the temperature units.
-9-
